Adamos Adamou, Colin Copeland. (2020). Experimental and Computational Analysis of Additive Manufactured Augmented Backside Liner Cooling Surfaces for Use in Micro Gas Turbines. Proceedings of ASME Turbo Expo 2020.
Zheng Liu, Stefan Tuechler, Colin D. Copeland. (2020). Optimization of Vaneless Volute and Mixed Flow Impeller for Pulsating Flow. Proceedings of ASME Turbo Expo 2020.
Katherine H. Powers, Ian J. Kennedy, Chris J. Brace, Paul A. Milewski, Colin D. Copeland. (2020). Development and Validation of a Model for Centrifugal Compressors in Reversed Flow Regimes. Proceedings of ASME Turbo Expo 2020.
Christopher Pilgrim, Yang Zhang, Colin D. Copeland, James Scobie, Carl Sangan, Alex Redwood, Solon Karagiannopoulos, Daniel Castillo, Silvia Araguás-Rodríguez, Jörg Feist. (2020). Temperature Profiling of Cooled Radial Turbine Wheel. Proceedings of ASME Turbo Expo 2020.
Antonio Pessanha, Colin Copeland, Zhihang Chen. (2020). A system-level study of an organic Rankine cycle applied to waste heat recovery in light-duty hybrid powertrains. IMECHE Turbochargers and Turbocharging Proceedings. IMECHE Turbochargers and Turbocharging, London, United Kingdom
Stefan Tuechler, Colin D. Copeland. (2019). Parametric Numerical Study on the Performance Characteristics of a Micro-Wave Rotor Gas Turbine. International Gas Turbine Congress Proceedings. International Gas Turbine Congress 2019, Tokyo, Japan
Yang Zhang, Misan Madamedon, Colin D Copeland, John P Fenton, Jason Subert, Kirsty Hinchliffe, Ian M. Arbon, Simon Leefe. (2019). The roticulating concept air compressor: experimental and numerical investigation. IOP Conference Series: Materials Science and Engineering. International Conference on Compressors and their Systems 2019, London, United Kingdom
Katherine H Powers, Chris J Brace, Chris J Budd, Colin D Copeland, Paul A Milewski. (2019). Modelling Axisymmetric Centrifugal Compressor Characteristics From First Principles. Proceedings of ASME Turbo Expo 2019.
Ian Kennedy, Tomasz Duda, Zheng Liu, Bob Ceen, Andy Jones, Colin D. Copeland. (2019). Investigation into a Combined Inverted Brayton and Rankine Cycle. Proceedings of ASME Turbo Expo 2019.
Adamos Adamou, Ian Kennedy, Ben Farmer, Ahmed Hussein, Colin Copeland. (2019). Experimental and Computational Analysis of an Additive Manufactured Vaporization Injector for a Micro-Gas Turbine. Proceedings of ASME Turbo Expo 2019.
Stefan Tüchler, Colin D. Copeland. (2019). Validation of a Numerical Quasi One-Dimensional Model for Wave Rotor Turbines With Curved Channels. Proceedings of ASME Turbo Expo 2019.
Tomasz Duda, Colin Copeland. (2018). Performance of the Automotive Turbocharger Compressor With Various CO 2 -Air Mixtures. Proceedings of ASME Turbo Expo 2018.
Yang Zhang, Tomasz Duda, James A. Scobie, Carl M. Sangan, Colin D. Copeland, Alex Redwood. (2018). Design of an Air-Cooled Radial Turbine: Part 1 — Computational Modelling. Proceedings of ASME Turbo Expo 2018.
Ian Kennedy, Zhihang Chen, Bob Ceen, Simon Jones, Colin D. Copeland. (2018). Experimental Investigation of an Inverted Brayton Cycle for Exhaust Gas Energy Recovery. Proceedings of ASME Turbo Expo 2018.
Yang Zhang, Tomasz Duda, James A. Scobie, Carl M. Sangan, Colin D. Copeland, Alex Redwood. (2018). Design of an Air-Cooled Radial Turbine: Part 2 — Experimental Measurements of Heat Transfer. Proceedings of ASME Turbo Expo 2018.
Calo Avola, Tomasz Duda, Richard Burke, Colin D. Copeland. (2018). Compressor pressure investigation of surge onset at steady and unsteady operations of an automotive turbocharger. Proceedings of IMECHE Turbochargers and Turbocharging. IMECHE Turbochargers and Turbocharging, London, United Kingdom
Stefan Tuechler, Zhihang Chen, Colin D. Copeland. (2018). Multipoint Optimisation of Radial Compressor Using Computational Fluid Dynamics and Genetic Algorithm. Proceedings of the Global Power and Propulsion Society. GPPS Montreal 2018, Montreal, Canada
Ian Kennedy, Zhihang Chen, Bob Ceen, Simon Jones, Colin D. Copeland. (2017). Inverted Brayton Cycle With Exhaust Gas Condensation. Proceedings of ASME Turbo Expo 2017.
Q. Zhang, P. Lu, P. Dimitriou, S. Akehurst, C. Copeland, M. Zangeneh, B. Richards, G. Fowler. (2017). Implementing Full Electric Turbocharging Systems on Highly Boosted Gasoline Engines. Proceedings of ASME Turbo Expo 2017.
Calogero Avola, Tomasz Duda, Richard Burke, Colin D. Copeland. (2017). Compressor surge for fully and semi fluctuating flows in automotive turbochargers. Proceedings of the Global Power and Propulsion Society. Global Power and Propulsion Forum 2017, Zurich, Switzerland Pavlos Dimitriou, Calo Avola, Richard Burke, Colin Copeland, Nial Turner. (2016). A Comparison of 1D-3D Co-Simulation and Transient 3D Simulation for EGR Distribution Studies. Proceedings of ASME ICEF2016. ASME 2016 Internal Combustion Engine Division Fall Technical Conference
Zhihang Chen, Colin D. Copeland, Bob Ceen, Simon Jones, Alan A. Goya. (2016). Modelling and Simulation of an Inverted Brayton Cycle as an Exhaust-Gas Heat-Recovery System. Proceedings of ASME ICEF2016. ASME 2016 Internal Combustion Engine Division Fall Technical Conference Calogero Avola, Colin Copeland, Richard Burke, Chris Brace. (2016). Numerical Investigation of Two-Stage Turbocharging Systems Performance. Proceedings of ASME ICEF2016. ASME 2016 Internal Combustion Engine Division Fall Technical Conference
Pengfei Lu, Chris Brace, Bo Hu, Colin D Copeland. (2016). Analysis and Comparison of the Performance of an Inverted Brayton Cycle and Turbo-Compounding With Decoupled Turbine and CVT Driven Compressor for Small Automotive Engines. Proceedings of ASME Turbo Expo 2016.
Calogero Avola, Pavlos Dimitriou, Richard Burke, Colin Copeland. (2016). Preliminary DoE Analysis and Control of Mapping Procedure for a Turbocharger on an Engine Gas-Stand. Proceedings of ASME Turbo Expo 2016.
Pavlos Dimitriou, Richard Burke, Colin D. Copeland, Sam Akehurst. (2015). Study on the effects of EGR supply configuration on cylinder-to-cylinder dispersion and engine performance using 1D-3D co-simulation. SAE Technical Paper. JSAE/SAE 2015 Small Engine Technologies Conference & Exhibition
Zhihang Chen, Colin D Copeland. (2015). Inverted Brayton cycle employment for a highly downsized turbocharged gasoline engine. SAE Technical Paper. JSAE/SAE 2015 International Powertrains, Fuels & Lubricants Meeting, Kyoto, Japan
Calogero Avola, Colin Copeland, Tomasz Duda, Richard Burke, Sam Akehurst, Chris Brace. (2015). Review of Turbocharger Mapping and 1D Modelling Inaccuracies with Specific Focus on Two-Stage Systems. SAE Technical Paper. 12th International Conference on Engines & Vehicles, Capri, Italy
Bo Hu, Sam Akehurst, Chris Brace, Pengfei Lu, Colin D. Copeland, J. W. G. Turner. (2015). Fuel Efficiency Optimization for a Divided Exhaust Period Regulated Two-Stage Downsized SI Engine. Proceedings of ASME Turbo Expo 2015.
Colin D. Copeland, Zhihang Chen. (2015). The Benefits of an Inverted Brayton Bottoming Cycle as an Alternative to Turbo-Compounding. Proceedings of ASME Turbo Expo 2015.
Richard Burke, Colin D Copeland, Tomasz Duda*, M. A. Reyes-Belmonte. (2015). Lumped Capacitance and 3D CFD Conjugate Heat Transfer Modelling of an Automotive Turbocharger. Proceedings of ASME Turbo Expo 2015. ASME Turbo Expo 2015, Montreal, Canada
Miguel Angel Reyes Belmonte, Colin D Copeland, Drummond Hislop, George Hopkins, Adrian Schmieder, Scott Bredda, Sam Akehurst. (2015). Improving Heat Transfer and Reducing Mass in a Gasoline Piston Using Additive Manufacturing. SAE Technical Paper. SAE 2015 World Congress & Exhibition
Bo Hu, Chris Brace, Sam Akehurst, Colin Copeland, J.W.G. Turner. (2014). Simulation study of divided exhaust period for a regulated two-stage downsized SI engine. SAE Technical Paper. SAE 2014 International Powertrain, Fuels & Lubricants Meeting, Birmingham, United Kingdom
JWG Turner, D Marshall, R Patel, A Popplewell, S Richardson, L Barker, J Martin, AJG Lewis, S Akehurst, CJ Brace, CD Copeland. (2014). The application of the superGen electromechanical centrifugal supercharger to the ultraboost extreme downsizing engine. Proceedings of 23rd Aachen Colloquium Automobile and Engine Technology.
Bo Hu, Chris Brace, Sam Akehurst, Colin D. Copeland, James Turner. (2014). Simulation study of divided exhaust period for a two-stage-regulated downsized SI engine. SAE Technical Paper. SAE 2014 Powertrain, Fuels and Lubricants Conference, Birmingham, United Kingdom
Bo Hu, Chris Brace, Sam Akehurst, Colin D Copeland, James Turner. (2014). The effect of divided exhaust period for improved performance in a highly downsized turbocharged gasoline engine. Proceedings IMechE Turbochargers and Turbocharging.
Bo Hu, Colin Copeland, Chris Brace, Sam Akehurst, Alessandro Romagnoli, Ricardo Martinez-Botas, J.W.G Turner. (2014). A new turboexpansion concept in a twin-charged engine system. SAE Technical Paper. SAE 2014 International Powertrain, Fuels & Lubricants Meeting, Birmingham, United Kingdom
Richard D. Burke, Colin D. Copeland, Tomasz Duda*. (2014). Investigation into the assumptions for lumped capacitance modelling of turbocharger heat transfer. 6th International Conference on Simulation and Testing, Berlin, Germany
Bo Hu, Chris J. Brace, Sam Akehurst, Colin D. Copeland, James WG Turner. (2014). Split exhaust period for extremely downsized turbocharged SI engine. Proceedings of IMECHE Turbochargers and Turbocharging. 11th International Conference on Turbochargers and Turbocharging, London, United Kingdom
A Romagnoli, WSI Wan-Salim, BA Gurunathan, RF Martinez-Botas, JWG Turner, N Luard, R Jackson, L Matteucci, C Copeland, S Akehurst, AGJ Lewis, CJ Brace. (2014). Assessment of supercharging boosting component for heavily downsized gasoline engines. Proceedings of the 11th International Conference on Turbochargers and Turbocharging. 11th International Conference on Turbochargers and Turbocharging,