Year 2023

  • Tang, Y.F., Rahmani Dehaghani, M., Sajadi, P., Balani S. B., Dhalpe, A., Panicker, S., Wu, D., Coatanea, E., Wang, G. G., “Online Thermal Field Prediction for Metal Additive Manufacturing of Thin Walls,” Journal of Manufacturing Processes 108(2023) p. 529-550.(Manuscript)
  • Rahmani Dehaghani, M., Tang, Y.F., Panicker, S., Wu, D., Coatanea, E., Wang, G. G., “Modeling and Optimization of Height-related Geometrical Parameters for Thin Wall Structures Manufactured by Metal Additive Manufacturing,” The International Journal of Advanced Manufacturing Technology, https://doi.org/10.1007/s00170-023-12618-0, 2023.(Manuscript)
  • Tang, Y., Rahmani Dehaghani, M., Wang, G. G., “Comparison of Transfer Learning based Additive Manufacturing Models via A Case Study,” http://arxiv.org/abs/2305.11181. May 2023.(Manuscript)
  • Wu, D., Sotnikov, D., Wang, G. G., Coatanea, E., Lyly, M., Salmi, T., “A Dimension Selection-Based Constrained Multi-Objective Optimization Algorithm Using a Combination of Artificial Intelligence Methods,” ASME Transactions, Journal of Mechanical Design, 145(8), Paper No: MD-23-1006, https://doi.org/10.1115/1.4062548, June 9, 2023.(Manuscript)
  • Tang, Y.F., Rahmani Dehaghani, M., Wang, G. G., “Review of Transfer Learning in Modeling Additive Manufacturing Processes,” Additive Manufacturing, Vol. 61, 5 January 2023, DOI:10.1016/j.addma.2022.103357 (manuscript).

Year 2022

  • Asadi, S., Moallem, M., Wang, G. G., “Simultaneous Sensor and Actuator Fault Reconstruction using a Sliding Mode Observer, Fuzzy Stability Analysis, and a Non-linear Optimization Tool,” Sensors, Published on Sept 10, 2022, https://www.mdpi.com/1424-8220/22/18/6866.(manuscript)
  • Rahmani Dehaghani, M., Tang, Y.F., Wang, G. G., “Iterative Uncertainty Calibration for Modeling Metal Additive Manufacturing Processes Using Statistical Moment-Based Metric,” ASME Transactions, Journal of Mechanical Design, DOI: 10.1115/1.4055149, Aug 2022.(manuscript)

Year 2021

Year 2020

  • Tang, Y., Long, T., Shi, R., Wu, Y. and Wang, G.G., “Sequential Radial Basis Function Based Optimization Method Using Virtual Sample Generation,” ASME Transactions, Journal of Mechanical Design, Nov 2020, 142(11): 111701, doi:10.1115/1.4046650 (manuscript)
  • Li, F., Shen, W., Cai, X., Gao, L. Wang, G.G., “A Fast Surrogate-Assisted Particle Swarm Optimization Algorithm for Computationally Expensive Problems,” Applied Soft Computing, Applied Soft Computing Journal, 92 (2020): 106303, doi:10.1016/j.asoc.2020.106303 (manuscript)
  • Wu, D., Wang, G. G., “Knowledge Assisted Optimization for Large-scale Design Problems: A Review and Proposition,” ASME Transactions, Journal of Mechanical Design, Jan 2020, 42(1):010800, doi: 10.1115/1.4044525.(manuscript)
  • Abram, D., Wikarna, A., Wang, G. G., Golnaraghi, F. A., “Modular Impact Diverting Mechanism for Football Helmet,” Journal of Biomechanics, Nov 2019, 99:109502, doi:10.1016/j.jbiomech.2019.109502.(manuscript)
  • Shi, R. Liu. L., Long, T., Wu, Y., and Wang, G. G., “Multi-fidelity Modeling and Adaptive Co-Kriging Based Optimization for All-electric GEO Satellite Systems,” ASME Transactions, Journal of Mechanical Design, Feb 2020, 142(2): 021404, doi:10.1115/1.4044321.(manuscript)

 Year 2019


  • Singh, Y., Khorasany R.M.H., Kim W. H .J., Alavijeh, A. S., Kjeang, E., Rajapakse. RKND, Wang, G. G., “Ex situ Characterization and Modelling of Fatigue Crack Propagation in Catalyst Coated Membrane Composites for Fuel Cell Applications,” International Journal of Hydrogen Energy, 44(2019) 12057-12072.(manuscript)
  • Wu, D., Coatanea, E., and Wang, G. G., “Employing Knowledge on Causal Relationship to Assist Multidisciplinary Design, Optimization,” ASME Transactions, Journal of Mechanical Design, 141(4), 041402, Jan 11, 2019, doi: 10.1115/1.4042342.(manuscript)
  • Wang, X., Song, B., Wang. G. G., and Wang, P., “A Novel Evolutionary Sampling Assisted Optimization Method for High Dimensional Expensive Problems,” IEEE Transactions on Evolutionary Computation, 2018, 10.1109/TEVC.2019.2890818, Jan 9, 2019. https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=8603839.(manuscript)
  • Nagarajan, H. P. N., Mokhtarian, H., Coatanea, E., Wang, G. & Haapala, K. R., “Knowledge-Based Optimization of ANN Topology for Additive Manufacturing Process Modeling: A Case Study for Fused Deposition Modeling,” ASME Transactions, Journal of Mechanical Design, Feb 2019, Vol. 141, 021705:1-12..(manuscript)

 

Year 2018


  • Woldermariam, E. T., Lemu, H. G., Wang, G. G., “CFD‐Driven Valve Shape Optimization for  Performance Improvement of a Micro Cross‐Flow Turbine,” Energies, 2018, 11, 248, doi:10.3390/en11010248. (manuscript)
  • Cheng, G. H., Gjernes, T., Wang, G. G., “An Adaptive Aggregation-based Approach for Expensively Constrained Black-box Optimization Problems,” ASME Transactions, Journal of Mechanical Design, Vol. 140, No. 9, 091402, June 2018 (manuscript)
  • Woldermariam, E. T., Coatanea, E., Wang, G. G., Lemu, H. G., and Wu, D., “Customized Dimensional Analysis Conceptual Modeling Framework for Design Optimization – A Case Study on the Cross-flow Micro Turbine Model,” Engineering Optimization, Oct 11, 2018, https://doi.org/10.1080/0305215X.2018.1519556. (manuscript)
  • Shi, R., Liu, L., Long, T., Wu, Y., and Wang, G. G., “Multidisciplinary modeling and surrogate assisted optimization for satellite constellation systems,” Structural and Multidisciplinary Optimization, July 25, 2018, https://doi.org/10.1007/s00158-018-2032-1. (manuscript)
  • Meselhy, K. T., Wang, G. G., “Reliability Based Design Optimization on Qualitative Objective with Limited Information,” ASME Transactions, Journal of Mechanical Design, August 17, 2018. doi:10.1115/1.4041172. (manuscript)

Year 2017


  • Wu, D., Haji Hajikolaei, K., Wang, G.G., “Employing Partial Metamodels for Optimization with Scarce Samples,” Structural and Multidisciplinary Optimization, Sept 30, 2017, https://link.springer.com/article/10.1007/s00158-017-1815-0.(manuscript)
  • Singh, Y., Khorasany, R.M.H., Sadeghi Alavijeh, A., Kjeang, E., Wang, G.G., Rajapakse, R.K.N.D., “Ex situ Measurement and Modelling of Crack Propagation in Fuel Cell Membranes under Mechanical Fatigue Loading,” International Journal of Hydrogen Energy, Vol. 42, No. 30, 2017, pp. 19257-19271. https://doi.org/10.1016/j.ijhydene.2017.06.151 (manuscript)
  • Zhang, G., Wang, G.G., Farhangi, H., Palizban, A., “Data Mining of Smart Meters for Load Category based Disaggregation of Residential Power Consumption,” Journal: Sustainable Energy, Grids and Networks, 10(2017), pp. 92-103.(manuscript)
  • Zhang, G., Tan, T., Wang, G.G., “Real-Time Smart Charging of Electric Vehicles for Demand Charge Reduction at Non-Residential Sites” IEEE Transactions on Smart Grid, https://doi.org/10.1109/TSG.2016.2647620, Jan 2017. (manuscript)

Year 2016

  • Macauley, N.,Watson, M., Lauritzen, M., Knights, S., Wang, G. G., and Kjeang, E., “Empirical Membrane Lifetime Model for Heavy Duty Fuel Cell Systems,” Journal of Power Sources, 336, 2016, pp. 240-250. (manuscript)
  • Pirmoradi， Z., Zhang, G., Wang, G. G., “Metamodeling-based Product Family Design of Plug-in Hybrid Electric Vehicles,” International Journal of Sustainable Engineering, http://dx.doi.org/10.1080/19397038.2016.1250840, Nov. 21, 2016.(manuscript)
  • Tavassoli, A., Lim, C., Kolodziej, J., Lauritzen, M., Knights, S., Wang, G.G., Kjeang, E., “Effect of Catalyst Layer Defects on Local Membrane Degradation in Polymer Electrolyte Fuel Cells,” Journal of Power Sources, 322, 2016, pp. 17-25.(manuscript)
  • Long, T., Liu, J., Wang, G.G., Liu, L., Shi, R., and Guo, X., “Discuss on Approximate Optimization Strategies Using Design of Computer Experiments and Metamodels for Flight Vehicle Design,” Chinese Journal of Mechanical Engineering, July 2016, 52(14), pp. 79-105. (manuscript)
  • Khorasany, R.M.H., Singh, Y., Sadeghi Alavijeh, A., Kjeang, E., Wang, G.G., Rajapakse, R.K.N.D., “Fatigue Properties of Catalyst Coated Membranes for Fuel Cells: Ex-situ Measurements Supported by Numerical Simulations,” International Journal of Hydrogen Energy, 41, 2016, pp. 8992-9003. (manuscript)
  • Haji Hajikolaei, Cheng, G.H., Wang, G. G., “Optimization on Metamodeling-Supported Iterative Decomposition,” ASME Transactions, Journal of Mechanical Design, Vol. 138, pp. 021401-1:11, Feb 2016.(manuscript)

Year 2015

  • Khorasany, R.M.H., Kjeang, E., Wang, G. G., Rajapakse, R.K.N.D., “Simulation of Ionomer Membrane Fatigue under Mechanical and Hygrothermal Loading Conditions,” Journal or Power Sources, Vol. 279, pp. 55-63, 2015. (manuscript)
  • Saremi, A., Jula, P., ElMekkawy, T., and Wang, G. G., “Bi-Criteria Appointment Scheduling of Patients with Heterogeneous Service Sequences Expert Systems with Applications,” Expert Systems with Applications, Vol. 42, pp. 4029-4041, 2015. (manuscript)
  • Long, T., Wu, D., Guo, X., Wang, G. G., Liu, Y., “Efficient Adaptive Response Surface Method Using Intelligent Space Exploration Strategy,” Structural and Multidisciplinary Optimization, Jan 8, 2015. (DOI Link)
  • McCauley, N., Alavijeh, A. S., Watson, M., Kolodziej, J., Knights, S., Wang, G. G., and Kjeang, E., “Accelerated Membrane Durability Testing of Heavy Duty Fuel Cells,” Journal of The Electrochemical Society, Vol. 162, Issue 1, F98-F107, 2015. (DOI Link),
  • Khorasany, R. M. H., Alavijeh, A. S., Kjeang, E., Wang, G. G., Rajapakse, R.K.N.D., “Mechanical Degradation of Fuel Cell Membranes under Fatigue Fracture Tests,” Journal or Power Sources, Vol. 274, pp. 1208-1216, 2015. (manuscript)
  • Cutbill, A., Wang, G. G., “Mining Constraint Relationships and Redundancies with Association Analysis for Optimization Problem Formulation,” Engineering Optimization, Jan 2015. (DOI Link)
  • Cheng, G., Younis, A., Haji Hajikolaei, K., Wang, G. G., “Trust Region based MPS Method for Global Optimization of High Dimensional Design Problems,” ASME Transactions, Journal of Mechanical Design, Vol. 137. No. 2, 021407, 2015. (DOI Link)
  • Ebrahimi, I., Golnaraghi, F., and Wang, G. G., “Factors Influencing the Oblique Impact Test of Motorcycle Helmets,” Traffic Injury Prevention, Vol. 16, pp. 404-408, 2015. (DOI Link)
  • Safari, A., Younis, A., Wang, G.G., Lemu, H., and Dong, Z., “Development of a Metamodel Assisted Sampling Approach to Aerodynamic Shape Optimization Problems,” Journal of Mechanical Science and Technology, Vol. 29, No. 5, pp. 2013-2024, 2015. DOI: 10.1007/s12206-015-0422-5. (manuscript)
  • Sadeghi Alavijeh, A., Khorasany, R.M.H., Habisch, A., Wang, G.G., Kjeang, E., “Creep Properties of Catalyst Coated Membranes for Polymer Electrolyte Fuel Cells,” Journal of Power Sources, Vol. 285, July 2015, pp. 16-28.(manuscript)
  • Sadeghi Alavijeh, A., Khorasany, R.M.H, Nunn, Z., Habisch, A., Lauritzen, M., Rogers, E., Wang, G.G., Kjeang, E., “Microstructural and Mechanical Characterization of Catalyst Coated Membranes Subjected to In-Situ Hygrothermal Fatigue,” Journal of the Electrochemical Society, 2015, Vol. 162, No. 14, F1461-F1469. (manuscript)
  • Zhang, Z., Jiang, C., Wang, G. G., Han X., “First and Second Order Approximate Reliability Analysis Methods Using Evidence Theory,” Reliability Engineering and System Safety, 137, May 2015, pp. 40-49.(manuscript)

Year 2014

  • Alavijeh, A. S., Goulet, M.A., Khorasany, R., Ghataurah, J., Lim, C., Lauritzen, M., Kjeang, E., Wang, G.G., and Rajapakse, N., “Decay in Mechanical Properties of Catalyst Coated Membranes Subjected to Combined Chemical and Mechanical Membrane Degradation,” Fuel Cells, Nov 2014. (DOI Link)
  • Pirmoradi, Z., Haji Hajikolaei, K., Wang, G. G., “Design Scalable Product Families by RBF-HDMR Metamodeling Technique,” Engineering Optimization, Oct 2014. (DOI Link)
  • Lim, C., Ghassemzadeh, L., Van Hove, F., Lauritzen, M., Kolodziej, J., Wang, G. G., Holdcroft, S., Kjeang, E., “Membrane degradation during combined chemical and mechanical accelerated stress testing of PEM fuel cells,” Journal or Power Sources, Vol. 257, pp. 102-110, 2014. (manuscript)
  • Khorasany, R. M. H., Goulet, M., Alavijeh, A. S., Kjeang, E., Wang, G. G., Rajapakse, R. K. N. D., “On the Constitutive Relations for Catalyst Coated Membrane Applied to Ii-Situ Fuel Cell Modeling,” Journal or Power Sources, Vol. 252, pp. 176-188, 2014. (manuscript)
  • Haji Hajikolaei, K., Wang, G. G., “High Dimensional Model Representation with Principal Component Analysis,” ASME Transactions, Journal of Mechanical Design, Vol. 136, 011003, 2014. (manuscript)
  • Haji Hajikolaei, K., Pirmoradi, Z., Cheng, G., Wang, G. G., “Decomposition based on quantified variable correlations uncovered by metamodeling for large scale global optimization,” Engineering Optimization, Vol. 47, No. 4, pp. 429-452, 2014. (DOI Link)

Year 2013

  • Saremi, A., Jula, P. ElMekkawy, T. and Wang, G. G., “Appointment Scheduling of Outpatient Surgical Services in a Multistage Operating Room Department.” International Journal of Production Economics, Vol. 141, No. 2, pp. 646-658, Feb 2013. (DOI Link)
  • Goulet, M., Khorasany, R., de Torres, C., Lauritzen, M., Kjeang, E., Wang, G. G., Rajapakse, N., “Mechanical properties of catalyst coated membranes for fuel cells,” Journal or Power Sources, Vol. 234, pp. 38-47, 2013. (manuscript)
  • Tavassoli, A., Haji Hajikolaei, K., Sadeqi, S., Wang, G. G., and Kjeang, E., “Modification of DIRECT for High-Dimensional Design Problems,” Engineering Optimization, June 19, 2013. (DOI Link)

Year 2012

  • Rahnamayan, S., Wang, G. G., “An Intuitive Distance-Based Explanation of Opposition-Based Sampling,” Elsevier Journal on Applied Soft Computing, Vol. 12, No. 9, pp. 2828-2839, 2012.(DOI Link)
  • Shan, S., Zhang, W. J., and Wang, G. G., “Large-scale Metamodeling and Validation of Power Systems,” International Review on Modeling and Simulations, Vol. 5, No. 2, pp. 546-560, April 2012. (manuscript)
  • Shahi, K. S., Wang, G. G., An, L., Bibeau, E., Pirmoradi, Z., “Using the Pareto Set Pursuing Multiobjective Optimization Approach for Hybridization of PHEV,” ASME Transactions, Journal of Mechanical Design, Vol. 134, No. 9,September 2012. (manuscript)

Year 2011

  • Shan, S., and Wang, G. G., Zhang, W., Cavers, M., “Metamodeling Transfer Capability of Manitoba-Ontario Electrical Interconnection,” Journal of Mechanics Engineering and Automation, Vol. 1, No. 6, 2011.(manuscript)
  • Wang, H., Shan, S., Wang, G. G., and Li. G., “MPS-based LS-SVR metamodeling technique for crashworthiness optimization, ASME Transactions, Journal of Mechanical Design, April 2011, Vol. 133, 041002. (manuscript)
  • Shan, S., Wang, G. G, “Turning Black box Into White Function,” ASME Transactions, Journal of Mechanical Design, Vol.133, Iss.3, DOI: 10.1115/1.4002978, Feb. 2011. (manuscript)
  • Kazami, M., Wang, G. G., Rahnamayan, S., and Gupta, K., “Global Optimization for Problems with Expensive Objective and Constraint Functions,” ASME Transactions, Journal of Mechanical Design, Vol.133, Iss.1, DOI: 10.1115/1.4003035, Jan. 2011. (manuscript)

Year 2010

  • Shan, S., and Wang, G. G., “Survey of Modeling and Optimization Strategies for High-Dimensional Design Problems," Structural and Multidisciplinary Optimization, Vol. 41, No. 2, 2010, Page 219-241. (manuscript)
  • Khokhar, Z. O., Vahabzadeh , H., Ziai, A., Wang, G.G., Menon, C., “Mixed Variable Pareto Set Pursuing (PSP) Method and its Performance for Multi-Objective Design Optimization, ASME Transactions, Journal of Mechanical Design, accepted March 2010 (manuscript)
  • Shan, S., and Wang, G. G., “Metamodeling for High Dimensional Simulation-Based Design Problems,” ASME Transactions, Journal of Mechanical Design, Vol. 132, 051009:1-11, May 2010 (manuscript)

Year 2009

  • Shan, S., and Wang, G. G., “Survey of Modeling and Optimization Strategies for High-Dimensional Design Problems," Structural and Multidisciplinary Optimization, Vol. 41, No. 2, 2010, Page 219-241.Copyright © Springer. The original publication is available at springerlink.com. (manuscript)
  • Rahnamayan, S. and Wang, G. G., “Toward Effective Initialization for Large-Scale Search Spaces,” World Scientific and Engineering Academy and Society (WSEAS), WSEAS Transactions on Systems, Vol. 8, No. 3, March 2009, pp. 355-367 (manuscript)
  • Xie, S., Gan, J., and Wang, G. G., “Optimal Process Planning for Compound Laser Cutting and Punch Using Genetic Algorithms,” International Journal of Mechatronics and Manufacturing systems, 2009, Vol. 2, No.1/2, pp. 20 – 38 (manuscript)
  • Duan, X., Wang, G. G., Kang, X., Niu, Q., Naterer, G., and Peng, Q., “Performance Studies of Mode Pursing Sampling (MPS) Method,” Journal of Engineering Optimization, Vol. 41, No. 1, 2009, pp. 1 – 21 (manuscript)
  • Shan, S., and Wang, G., “Reliability Space Pursuing for RBDO with Black-box Performance Functions,” Chinese Journal of Mechanical Engineering (English Version), Vol. 22, No. 1, Feb. 2009, pp. 27-35 (manuscript)
  • Rahnamayan, S. and Wang, G. G., “Solving Large Scale Optimization Problems by Opposition-Based Differential Evolution (ODE), World Scientific and Engineering Academy and Society (WSEAS), Transactions on Computers, Vol. 7, Issue 10, Oct. 2008, pp. 1792-1804 (manuscript)

Year 2008

  • Rahnamayan, S. and Wang, G. G., “Investigating in Scalability of Opposition-based Differential Evolution,” WSEAS Transactions on Systems, accepted, Sept 4, 2008. (manuscript)
  • Duan, X., Wang, G. G., Kang, X., Niu, Q., Naterer, G., and Peng, Q., “Performance Studies of Mode Pursing Sampling (MPS) Method,” Journal of Engineering Optimization, Accepted, June 2008. (manuscript)
  • Wang, D., Naterer, G., and Wang, G. G., “Boundary Search and Simplex Decomposition Method for MDO Problems with a Convex or Convex-like State Parameter Region,” Structural and Multidisciplinary Optimization, Vol. 35, 2008, pp. 285-300. (manuscript) Copyright © Springer. The original publication is available at springerlink.com.
  • Liao, X., and Wang, G. G., “Simultaneous Optimization of Fixture and Joint Positions for Non-rigid Sheet Metal Assembly,” Journal of Advanced Manufacturing Technology, Vol. 36, 2008, pp. 386–394. (manuscript)
  • Shan, S., and Wang, G., “Reliable Design Space and Complete Single-Loop Reliability Based Design Optimization,” Reliability Engineering and System Safety, Vol. 93, No. 8, 2008, pp 1218-1230.DOI: http://dx.doi.org/10.1016/j.ress.2007.07.006
  • Sharif, B., Wang, G. G., and ElMekkawy, T., “Mode Pursing Sampling Method for Discrete Variable Optimization on Expensive Black-box Functions,” ASME TransactionsJournal of Mechanical Design, Vol. 130, 2008, pp.021402-1-11. (manuscript)

Year 2007

  • Liao, X., and Wang, G. G., “Non-linear Dimensional Variation Analysis for Sheet Metal Assemblies by Contact Modeling,” Finite Elements in Analysis and Design, Vol. 44, 2007, pp. 34-44.
  • Saremi, A., ElMekkawy, T., and Wang, G. G., “Tuning the Parameters of a Memetic Algorithm to Solve Vehicle Routing Problem Using Design of Experiments,” International Journal of Operational Research, Vol. 4, No. 4, 2007, pp. 206-219. (manuscript)
  • Hendizadeh, H. S., ElMekkawy, T., and Wang, G. G., “Bi-criteria Scheduling of a Flowshop Manufacturing Cell with Sequence Dependent Setup Times,” European Journal of Industrial Engineering, Vol. 1, Nov. 4, 2007, pp. 391-413.
  • Xie, S. Q., Wang, G. G., and Liu, Y., “Optimal Nesting of Two-dimensional Irregular Parts: An Integrated Approach”, International Journal of Computer Integrated Manufacturing, Vol. 20, No. 8, December 2007, pp. 741-756. (manuscript)
  • Ghorbani, R., Wu, C., and Wang, G. G., “Nearly Optimal Neural Network Stabilization of Bipedal Standing Using Genetic Algorithm,” Engineering Applications of Artificial Intelligence, Vol. 20, No. 4, June 2007, pp. 473-480. (manuscript)
  • Wang, D., Wang, G. G., and Naterer, G., “Extended Collaboration Pursuing Method for Solving Larger MDO Problems,” AIAA Journal, Vol. 45, No. 6, June, 2007, p 1208-1221. (manuscript)
  • Wang, D., Wang, G. G., and Naterer, G., “Collaboration Pursuing Method for MDO Problems,” AIAA Journal, Vol. 45, No. 5, May 2007, pp. 1091-1103. (manuscript)
  • Wang, G. G., Shan, S., “Review of Metamodeling Techniques in Support of Engineering Design Optimization,” ASME Transactions, Journal of Mechanical Design, Vol. 129, No. 4, April 2007, pp. 370-380. (manuscript)

Year 2006

  • Shan, S., and Wang, G. G., “Failure Surface Frontier for Reliability Assessment on Expensive Performance Function,” ASME Transactions, Journal of Mechanical Design, Vol. 128, Nov. 2006, pp. 1227-1235. (manuscript)

Year 2005

  • Wang, G. G., Wang, L. and Shan, S., “Reliability Assessment Using Discriminative Sampling and Metamodeling,” SAE Transactions, Journal of Passenger Cars – Mechanical Systems, 2005, pp. 291-300. (manuscript)
  • Liao, X., and Wang, G. G., “Wavelet-Based Method of Variation Analysis for Non-rigid Assemblies,” International Journal of Machine Tools and Manufacture, Vol. 45, 2005, pp. 1551-1559. (manuscript)
  • Wang, G. G., and Xie, S. Q., “Optimal Process Planning for a Combined Punch and Laser Cutting Machine Using Ant Algorithms,” International Journal of Production Research, Vol. 43, No. 11, June 2005, pp. 2195-2216. (manuscript)
  • Shan, S., and Wang, G. G., “An Efficient Pareto Set Identification Approach for Multi-objective Optimization on Black-box Functions”, ASME Transactions, Journal of Mechanical Design, Vol. 127, No. 5, pp. 866-874, 2005. (manuscript)

Year 2004

  • Liao, X., and Wang, G. G., “Employing Fractals and FEM for Detailed Variation Analysis of Non-rigid Assemblies,” International Journal of Machine Tools and Manufacture, Vol. 45, 2004, pp. 445-454. (manuscript)
  • Wang, L., Shan, S., and Wang, G. G., “Mode-Pursuing Sampling Method for Global Optimization on Expensive Black-box Functions,” Journal of Engineering Optimization, Vol. 36, No. 4, August 2004, pp. 419-438. (manuscript)
  • Wang, G. G., and Simpson, T., “Fuzzy Clustering Based Hierarchical Metamodeling for Space Reduction and Design Optimization,” Journal of Engineering Optimization, Vol. 36, No. 3, June 2004, pp. 313-335. (manuscript)
  • Wang, G. G., “Bringing Games into the Classroom in Teaching Quality Control,” International Journal of Engineering Education, Vol. 20, No. 5, pp. 3-15, 2004. (manuscript)
  • Shan, S., and Wang, G. G., “Space Exploration and Global Optimization for Computationally Intensive Design Problems: A Rough Set Based Approach,” Journal of Structural and Multidisciplinary Optimization, Vol. 28, No. 6, pp. 427-441. Copyright © Springer. The original publication is available at springerlink.com. (manuscript)
  • Shan, S., and Wang, G. G., “Design Space Reduction for Multi-objective Optimization and Robust Design Optimization Problems,” accepted by Transactions of SAE, Journal of Materials & Manufacturing, 2004. (manuscript)
  • Wong, L., Wang, G. G., and Strong, D., “A New Design for Production (DFP) Methodology with Two Case Studies,” Journal of Concurrent Engineering: Research and Applications, Vol. 12, No. 4, 2004. pp. 263-273. Copyright © [2004] Technomic Publishing Co., Inc. (manuscript)

Year 2003

  • Wong, L. M., and Wang, G. G., “Achieving Automatic Design and Optimization for Industrial Silencers,” Journal of Manufacturing Systems, Vol. 22, No. 4, pp. 327-339, 2003. (manuscript)
  • Liao, X. and Wang, G. G., “Evolutionary Path Planning for Robot Assisted Part Handling in Sheet Metal Bending,” Journal of Robotics and Computer Integrated Manufacturing, Vol. 19, pp. 425-430, 2003. (manuscript)
  • Wang, D., Naterer, G., and Wang, G. G., “Thermofluid Optimization of a Heated Helicopter Engine Cooling Bay Surface,” Canadian Aeronautics and Space Journal, Vol. 49, No. 2, pp. 1-14, June 2003. (manuscript)
  • Wang, G. G., “Adaptive Response Surface Method Using Inherited Latin Hypercube Design Points,” ASME Transactions, Journal of Mechanical Design, Vol. 125, June 2003, pp. 1-11. (manuscript)

Other Selected Publications

  • Wang, G. G., “Definition and Review of Virtual Prototyping,” ASME Transactions, Journal of Computing and Information Science in Engineering, Vo. 2, No. 3, pp. 232-236, September 2002 (manuscript)
  • Wang, G., Dong, Z., and Aitchison, P., “Adaptive Response Surface Method — A Global Optimization Scheme for Computation-intensive Design Problems,” Journal of Engineering Optimization, Vol. 33, No. 6, pp. 707-734, 2001. (manuscript)
  • Wang, G., and Dong, Z., “Design Optimization of a Complex Mechanical System Using Adaptive Response Surface Method,” Transactions of the CSME, Vol. 24, N0. 1B, pp. 295-306, 2000. (manuscript)


Note: To view manuscripts in the PDF file, you need Adobe Acrobat Reader 3.0 or above. You can download free from their site. Please feel free to contact Prof. Wang to request the final paper versions and other publications.