The TRANTAB Procedure

Example 3: Editing by Specifying a Decimal Value for Starting Position

Procedure features:

LIST statement

REPLACE statement

SAVE statement

This example edits the translation table created in Creating a Translation Table . The decimal value specified in the REPLACE statement marks the starting position for the changes to the table.

The vertical arrow in both SAS logs marks the point at which the changes begin.

Program

options nodate pageno=1 linesize=80 pagesize=60;
proc trantab table=newtable;

   list one;

SAS Log

NOTE: Table specified is NEWTABLE. NOTE: NEWTABLE table 2 is uninitialized. NEWTABLE table 1: [darr] 0 1 2 3 4 5 6 7 8 9 A B C D E F 00 '00010203A309E57FF9ECC40B0C0D0E0F'x 10 '10111213A5E008E71819C6C51C1D1E1F'x 20 'C7FCE9E2E40A171BEAEBE8EFEE050607'x 30 'C9E616F4F6F2FB04FFD6DCA2B6A7501A'x 40 '20E1EDF3FAF1D1AABABFA22E3C282B7C'x 50 '265FACBDBCA1ABBB5F5F21242A293BAC'x 60 '2D2F5FA6A6A6A62B2BA6A62C255F3E3F'x 70 'A62B2B2B2B2B2B2D2D603A2340273D22'x 80 '2B6162636465666768692D2BA6A62B2B'x 90 '2D6A6B6C6D6E6F7071722DA62D2B2D2D'x A0 '2D7E737475767778787A2D2B2B2B2B2B'x B0 '2B2B2B5F5FA65F5F5FDF5FB65F5FB55F'x C0 '7B4142434445464748495F5F5F5F5F5F'x D0 '7D4A4B4C4D4E4F5051525F5F5FB15F5F'x E0 '5C83535455565758595A5F5FF75F5FB0'x F0 '30313233343536373839B75F6EB25F5F'x

replace 10 20 10 200 'x' 'ux' '092040'x;

save;

list one;

SAS Log

NOTE: Saving table NEWTABLE. NOTE: NEWTABLE table 2 will not be saved because it is uninitialized. NEWTABLE table 1: [darr] 0 1 2 3 4 5 6 7 8 9 A B C D E F 00 '00010203A309E57FF9EC140AC8787578'x 10 '09204013A5E008E71819C6C51C1D1E1F'x 20 'C7FCE9E2E40A171BEAEBE8EFEE050607'x 30 'C9E616F4F6F2FB04FFD6DCA2B6A7501A'x 40 '20E1EDF3FAF1D1AABABFA22E3C282B7C'x 50 '265FACBDBCA1ABBB5F5F21242A293BAC'x 60 '2D2F5FA6A6A6A62B2BA6A62C255F3E3F'x 70 'A62B2B2B2B2B2B2D2D603A2340273D22'x 80 '2B6162636465666768692D2BA6A62B2B'x 90 '2D6A6B6C6D6E6F7071722DA62D2B2D2D'x A0 '2D7E737475767778787A2D2B2B2B2B2B'x B0 '2B2B2B5F5FA65F5F5FDF5FB65F5FB55F'x C0 '7B4142434445464748495F5F5F5F5F5F'x D0 '7D4A4B4C4D4E4F5051525F5F5FB15F5F'x E0 '5C83535455565758595A5F5FF75F5FB0'x F0 '30313233343536373839B75F6EB25F5F'x

At position 10 (which is byte 11), a vertical arrow denotes the starting point for the changes to the translation table.

At byte 11, decimal 20 (which is hexadecimal 14) replaces hexadecimal C4.
At byte 12, decimal 10 (which is hexadecimal 0A) replaces hexadecimal 0B.
At byte 13, decimal 200 (which is hexadecimal C8) replaces hexadecimal 0C.
At byte 14, character 'x' (which is hexadecimal 78) replaces hexadecimal 0D.
At bytes 15 and 16, characters 'ux' (which are hexadecimal 75 and 78, respectively) replace hexadecimal 0E and 0F.
At bytes 17, 18, and 19, hexadecimal 092040 replaces hexadecimal 101112.

Chapter Contents
Previous
Next
Top of Page